KWS DYNO DAY

[burns]

Randy just brought his ass up here in a pissed off mood! The bitch had a roll of quaters in his hand. Grabbed me by the shirt and began to punch my face in. Now I am missing 3 teeth and blood is pouring like a river from hell. All because he wants a dyno day. Well hell you got one. I am sure he will have a gaint post about this so stay tunes.

P.S. Could some one bring me some moonshine and some chocolate bars?

About 9 months ago a couple of guys got together and decided to throw a dyno day. alot of people showed up and it was a VERY educating event... now this isnt your drinking partying dancing on the bar kinda thing like my parties but if you own a bike it is a must. I promise you will know more about bikes by the end of the day. also helps seperate educated bikers from the BS ones. so what is a dyno day?
Kevin hunt at KWS motorsports has one of the most accurate dyno's in the U.S. this man has spent more mony on the dyno than his own house im sure. {I think he sleeps with the dyno} This machine is spot on target! well to get on a machine like so most of the time you can be asked to pay as much as $350 however that is not the case. they are breaking it down and THEN discounting it.
rear wheel horse power pull $25
HP + tourqe AND air fuel mixture $40
Dyno jet mapping $250!!!!!!!!
Buy PC3usb's below internet cost!!! $250!

Also i will be hoasting a Weigh in! witch means for $5 we will weigh your bike and give you front and rear measuments. For $10 we will drain your tank and give you wet and dry weight!

There has also been rumors of some of the ol AMA stars may be stoping in. {not confirmed YET}

so what do you need to do?

First make sure your bike is in good running order. check your chain and lube it. dont bring me some pile of shit and ask to put it on the $60000 dyno.. aint happening..
tire pressure= each to his own but i recomend about 31-34lbs in the rear tire.
Be at KWS motorsports on
6/24/06 between 9am-3pm
preregistration has not been organized yet so give me a week. I promise this will be sold out!!!!!!! preregistering is a good idea!

Directions can be found at www.kwsmotorsports.com
info at www.scriders.com or www.cornerjunkies.com

Thanks 10 speed
sorry about the teeth steve.

[mccutch2u]

like i said before there needsto be a pot for each class say take 5 bucks from each dyno run put it in a pot and highest dyno numbers wins
each class meaning 600 750 1000 vtwin modified or something

how bout the 1000+ crowd

[ccs273]

one more event we can beat up on old randy.........great, I just might have to show up,..............j/k

[mccutch2u]

are you sasying that you have motor work or are you refering to the almighty busa

[burns]

Even if you do not want to put your bike on the dyno. you are still welcome to come and hang out and eat. Even if you drive you 4 wheel cage here. I promise I won't run out in my straw hat and riffle and chase you off.

[burns]

And Wenck, if you do not have a race that weekend you are working. Do let your crew in Beaufort know about this.

hey steve we need to start a sign up and prepay program. Im getting a good responce on the other side.

[dumwinnie]

just curious....dry weight means dry, right? no fork oil, fuel, brake fluid, coolant, oil, windshield wiper fluid (j/k). for $10 you're going to pretty much do a full fluid service on my bike?

[wencker79]

i should be racing the weekend after the dyno day so i will be there. i will try and get ahold of the group that rides down here.

[ccs273]

are you sasying that you have motor work or are you refering to the almighty busa
just the almighty busa.......chris

this is the next big shin dig! mr mike could you move this to chaelston events please.

[Dmaniiz]

I'm In!!!
Sign me up for some HP & Torque dyno run for sure!!!
Any suggestions for mods on a k5GSX-R1000 to make the dyno tuning worth the investment?

[rufasterthani]

can i bring my gas cyharged ex500

[Mike]

can i bring my gas cyharged ex500

Sure Chris :smilebig:

[SUM650]

Bring the R1 to.

So who from this site is going?
Chris?
damiiz
Myself
Barry?

[dumwinnie]

i'm still waiting to find out if i'm going to receive a FULL fluid service for $10.

i would like to stop by and partake in some of the inevitable shit talking.

lol no dave that is just gas... but i will be more than happy to empty your oil and then put it on the dyno

[dumwinnie]

fine go ahead, i'll empty your head of what teeth you have left.

just wanted to point out that you may want to be a little more specific when you're offering a service. i'm not getting the r6 dynoed, i know she isn't anything special, but enough for what i want her for. i'll see everyone up there.

[Dmaniiz]

Wow!!!
LoL

[SUM650]

Aren't these guys funny?

im stoked about this wanna see what the little green machine can do.

[Dmaniiz]

is that with or without the "undertail afterburner" pipes

[burns]

I say the green machine pulls a 94.2 hp

im thinkin 114

[burns]

let's hope that or higher. I have had 06 R6s in here stock making higher than that

[SUM650]

My 03 636 made 111.5 with just a slipon last year.

well last year there was a guy with a silver {i think} 636 with paper tags and nipples on the tires that ran a 109. on kawi forums they say ditching the butterfly vaulve is worth 9hp. witch i doubt. but hey if that is true then i should be around 118... thats why i said 114 because kawiforms is kinda squidy. so im hopeing for a 114. then with a pc and some other mods my goal will be to have the first proven 600 with over 120rwhp. and yes i know stevo is working on a nice 06r6. but it would be cool to see some 600's that are on the street with 120+ rwhp.

[burns]

I was thinking of maybe a street built 06 R6 with about 134 hp. Sweet!!

[Dmaniiz]

I'm hoping for 160hp out of my bike. If I get less than 155hp, I will be shocked.

spoke with kevin today. a list needs to be made. the people on the list will take priority. there are only 30 slots. soooo.
Doug
Randy

[burns]

first on the list is Daniel

[Nash]

Since I can't make it, someone post the results, please. Hopefully an '06 CBR1000 will make it. I'm curious to see if there was an improvement.

doug
randy
eric with the R-1


nash i dont think i know anyone with the new cbr....

[burns]

Got one in the back being built

no i agree with nash...wow... anyway. i would like to see a comparo of the 05 and 06

[Scotty2]

Put me on the list please, I haven't dyno'd mine since the exhaust, pc3 and air filter.

Put me on the list please, I haven't dyno'd mine since the exhaust, pc3 and air filter.
your on it.

[mccutch2u]

not sure that i will make it dynojet just sent my sh#$ out and not sure whne Kev will have time to map it with the ignition module thoug i would like to put it up against scotty to see what the comparison will be

[Scotty2]

What does the ignition module do for you? I probably have some room for improvment on the PC3 map. Graves loaded thier map on it but I'm sure the air is a little more dense around here. Probably a little cleaner too.

[mccutch2u]

supposedly 5-10 hp i have seen people on the r1 forum claim 15 and up with just the module

with the ignition modual? i heard like 2 or 3

[mccutch2u]

depends on the bike and where you look at the hp....................my pipe only gave me 6hp but 16 in the midrange

Almost time have been getting alot of interesting phone calls.

[Nash]

The winner gets a lap dance from Scotty 2 Hottie!

[GTS]

I will have my STOCK gixxer there. Everyone can see that it really is STOCK....... Just ask kevin...

[burns]

I will have the new KWS frame slider pucks up front. These replace the vortex pucks. A hell of a lot better and has been tested by both KWS riders. They fit the vortex frame slider bases. Will have cost in the morning.

[Dmaniiz]

Dude!!! I am so stoked about tomorrow!!! My baby is going to have her debut on the Dyno...I want pix and video!!! Lighting is important too!!! I learned that from watching a couple behind the scenes clips on my porno collection!!! :lol:

mr chris was down town said he was going to rock a 160 out of the r1 or give out free blow jobs!

[burns]

THANK TO ALL WHO SHOWED UP. IT WAS A BLAST!

[mccutch2u]

and the winner is................................................ ....???????????????????????????/

[dumwinnie]

and the winner is................................................ ....???????????????????????????/
well, you won't have to worry about dishing out any blowjobs.

[Dmaniiz]

Who was the winner...???

[mccutch2u]

all i will say is that your number got beat as well as chris wilkersons busa

[mccutch2u]

although busa was the pump gas king and doug runner up

[Dmaniiz]

"All I got to say"...Thaz an oxy-moron coming from you bro :lol: . No offense dude, you can throw down what ya got to throw down. You earned your way to the top.

The way I look at it is this, it's kind of like me and you both passing the 10th grade in highschool,...

... the only difference is you had to go to summer school to make the grade. :wall:

Woops!!! You know I got mad love for ya bro!!! :wtg:

[Nash]

I haven't seen any numbers yet. What's up?

[SUM650]

Chris M. - R1 -177 HP with race fuel
1st run was 166 without race fuel

Doug B. - gsxr 1k- 169 hp on pump gas, full yoshi / pc 3

Chris W. - 171 - Busa, pump gas, full exhast, pc3, I want to point out that this bike also has 100 ft lbs of torque all over the graph.

Allen C. - 166- gsxr 1K- all stock with mr9 only.

2 - 2006 750's one was 128 stock and one was 123.

1 600 RR, Charles 106 hp.

Several R6's all less than 110 hp.

Another no show for I'm coming Scotty.

Randy's 06 zx 636 won the 600 class with 114 hp on mr9. Now on the other hand he was a little embarrased when the 10 could only mustar up 165 ponies on dyno. This just happend to be the 2nd to lowest output of all the liter bikes dynoed. There was one 929 that made an astonishing 138 hp. Every gsxr 1000 put on the dyno made at least 166 hp or better, and most of them were using pump gas. Chris M. won the liter bike class hands down. I don't know if Chris heard this or not while he was sporting his crown. Someone said that he will never own the street king title in this town! Those were some bold words, but who knows, maybe Chris is like me and has no interest in the prestigious street king title what so ever? :shrug:

[Nash]

Damn Chris, pretty impressive!!

wow had a blast guys. time for a pc i think on the little zx. Holly shit that thing is a screamer! lol once again learned alot as usual on these days. the comment i made i think sums the day up. one person said "looks like some squidy people showed up" i stated " there not the ones that will scare you, there here learning. Imagine the squidy ones that dont come to these things...there doomed" I like dyno days because there like drag nights or trackdays. there educating. I learned that tire choise effects rwhp. not only with the big zx but also saw it on charles 600rr's. so i think im going to start looking into some different tire set ups on the 10... last year when i shot out the 173 i was on a bs tire. I was actually worried last year that the tire wouldnt stick to the drum. i figured the gp compound would produce better traction and more hp on the drum. however kevin tought me that the stickyer the tire the hevier the tire...aka hp robbing. so I think im going to try a 180 draggon now.

[SUM650]

You didn't lose 8 hp in the tire. A couple hp maybe, but not 8. I get my race bikes dynoed with the race tires that I will be running, because using another tire to give you a false higher number that won't help at all. I need to know the real deal. BTW Dave I had my new sv mapped and tuned last Friday. Hold on to your seat for this now. She is putting out a full 81 hp. That's six more than my old sv. I didn't want to brag about this or anything, but what the hell. It's out there now. :evillaugh: To me personally, the most impressive bike of the day was Doug's gixxer 1000 with 169 on pump gas. I was hoping a new 1000RR and zx10 would show up, but we had no luck with that.

[mccutch2u]

is this anything new..........................always an excuse................just like Barry beat him because he wasn't use to the bike.................a bike that he claims to be running 1:20+ @ jennings on if i am not mistaking he got out dynoed by every gsxr 1000 but an 01 1000................... @ least he has the zx6 to fall back on i don't suppose those were stock though

[the_MAC]

well, i couldn't make the dyno day because i had to work, but i did have the new r6 race bike that jason and i are supposed to race up at kevin's shop a few weeks ago...with a full akropovic exhaust and pc3 ONLY (i.e., no other mods...), the '06 r6 ran 117.8 rwhp with PUMP GAS and stock tires WITHOUT having 37 extra cc's to help out...pretty stout if you ask me...any takers??

[SUM650]

What's up Mac Daddy? I keep hearing about you possibly racing, all I see is iron man Jason racing. So when are you going to race? Next weekend in Atlanta, or are you going to do CCS at Barber in August? I say do Barber. I am so syked up for Barber.

Those numbers sound pretty good coming from the 06 R6, but it was there to participate. BTW congrads on your new job I hear.

[SUM650]

just like Barry beat him because he wasn't use to the bike.................

Well in all fairness Randy and I didn't do a straight up 2nd gear run. So I was just talking smack that I beat him. To be totally honest I can't beat that skinny little Keith on his R6, but he knows I'm game at anytime. Next week I'm going to skip a meal and go jogging a few days. Then I'll be ready for any 600 that wants a beat down. We know who the King of the street is so, let's plan to do another big track day and have some fun. Then you all can figure out who's got the biggest sack if you guy's must. I bet that not to many non race riders are going to be passing drag racing Randy! I almost forgot to say thanks to all of the KWS staff that helped out with this dyno day. It was a lot of fun for sure. I also wanted to thank Randy for spending his time energy and effort for organizing this whole event again. Keep doing what you do Randy, the Charleston sport biking scene is now livelier than it's ever been. Job well done!

[Scotty2]

FUC!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! That was this weekend? Sorry ya'll I had the best of intentions, but I got stuck with the kid all day and didn't even realize it was DYNO DAY. Crap I really needed to put my bike on the dyno too. :wall: :wall: :wall: :wall: :wall: :wall: Well besides missing the Dyno day, my bike fell off the kickstand last might, damnest thing I ever seen, busted the tank bracket and minor scuffs on the left side.

[GTS]

FYI..... My gixxer was 167.5 (not 166). Anyone want to do some roll ons??

[Scotty2]

Chris M. - R1 -177 HP with race fuel
1st run was 166 without race fuel

Doug B. - gsxr 1k- 169 hp on pump gas, full yoshi / pc 3

Chris W. - 171 - Busa, pump gas, full exhast, pc3, I want to point out that this bike also has 100 ft lbs of torque all over the graph.

Allen C. - 166- gsxr 1K- all stock with mr9 only.

2 - 2006 750's one was 128 stock and one was 123.

1 600 RR, Charles 106 hp.

Several R6's all less than 110 hp.

Another no show for I'm coming Scotty.

Randy's 06 zx 636 won the 600 class with 114 hp on mr9. Now on the other hand he was a little embarrased when the 10 could only mustar up 165 ponies on dyno. This just happend to be the 2nd to lowest output of all the liter bikes dynoed. There was one 929 that made an astonishing 138 hp. Every gsxr 1000 put on the dyno made at least 166 hp or better, and most of them were using pump gas. Chris M. won the liter bike class hands down. I don't know if Chris heard this or not while he was sporting his crown. Someone said that he will never own the street king title in this town! Those were some bold words, but who knows, maybe Chris is like me and has no interest in the prestigious street king title what so ever? :shrug:


Did I miss something else?

[Nash]

Scott, when was the last you made something except for meeting at the tree once every three months?

[Nash]

Barry, I'm going to have to ride that little beast one of these days! That thing looks like a blast and 81hp is pretty bad ass!

[crash]

Pretty good numbers from those damn Suzukis with a Yammi on top. As far as the 600s I think mine could beat that with MR9 so no big deal there.

[SUM650]

FYI..... My gixxer was 167.5 (not 166). Anyone want to do some roll ons??

My bad Allen. No matter what the hp is anyway your still the KING, and your bike was proven to be all stock. You should have proped the gas tank up so everyone could get a look at that monster motor!

Barry, I'm going to have to ride that little beast one of these days! That thing looks like a blast and 81hp is pretty bad ass!

I tried to get you to ride the old one, but no. You wouldn't even try it. I'll be ready for to to try on the next trackday when you get back into town.

[dumwinnie]

the way dave's suzuki was treating him (at roebling and jennings) i'd figure he'd take you up on that.

[Nash]

the way dave's suzuki was treating him (at roebling and jennings) i'd figure he'd take you up on that.

I just don't like riding others bikes since there's always the chance of crashing. Not that I wouldn't repair it, it's just crashing someones bike.

Hopefully, you guys will go to Roebling in Oct; I'd love to run the new surface. And once I get back, I hope to fix all the problems I have with the bike. I need new rotors, engine still has the fuel problem and I might need to do something with the transmission but the Savannah River still isn't out of the question!

[Scotty2]

Scott, when was the last you made something except for meeting at the tree once every three months?

Some times family has to come first, but I don't expect you to know anything about that.

[burns]

I am no pro, but here are some photos.

http://i18.photobucket.com/albums/b135/burns420/mikejim1.jpg

http://i18.photobucket.com/albums/b135/burns420/mikeharl.jpg

http://i18.photobucket.com/albums/b135/burns420/leaving.jpg

http://i18.photobucket.com/albums/b135/burns420/kws6.jpg

http://i18.photobucket.com/albums/b135/burns420/kws5.jpg

http://i18.photobucket.com/albums/b135/burns420/kws4.jpg

http://i18.photobucket.com/albums/b135/burns420/kws3.jpg

http://i18.photobucket.com/albums/b135/burns420/kws2.jpg

http://i18.photobucket.com/albums/b135/burns420/kws1.jpg

http://i18.photobucket.com/albums/b135/burns420/joeblackr6.jpg

http://i18.photobucket.com/albums/b135/burns420/jimmike2.jpg

http://i18.photobucket.com/albums/b135/burns420/jamkevin.jpg

http://i18.photobucket.com/albums/b135/burns420/groupwe.jpg

http://i18.photobucket.com/albums/b135/burns420/chrisw.jpg

http://i18.photobucket.com/albums/b135/burns420/blueshirtjeans.jpg

http://i18.photobucket.com/albums/b135/burns420/actingstu.jpg

http://i18.photobucket.com/albums/b135/burns420/0739838-R1-052-24A.jpg

http://i18.photobucket.com/albums/b135/burns420/0739836-R1-014-5A.jpg

http://i18.photobucket.com/albums/b135/burns420/0739838-R1-050-23A.jpg

http://i18.photobucket.com/albums/b135/burns420/mikewige.jpg

http://i18.photobucket.com/albums/b135/burns420/randyrides.jpg

http://i18.photobucket.com/albums/b135/burns420/runhardr1.jpg

http://i18.photobucket.com/albums/b135/burns420/suzukas.jpg

http://i18.photobucket.com/albums/b135/burns420/tomsride.jpg

http://i18.photobucket.com/albums/b135/burns420/wenck.jpg

http://i18.photobucket.com/albums/b135/burns420/streetbul.jpg

[Mike]

Damn, who brought the _other_ Duke in Charleston there?

Wish I could've made it...

[burns]

I think his name is Robert. Pulled a 55hp.

I was wondering if you and Katherine was going to show, maybe for the next one you will be able to come out.
It would be cool if we were able to do an event during the winter and cook a hog.

[mccutch2u]

STOCK gsxr's are NOT putting down 160+hp out of the creat. I know the number it is between 154 and 155. and as far as my pump gas numbers there 163.4


so randy you believe everyone now ...............about those stock gixxers..........also since you got 165 on mr9 does that mean you are only in the 150's on pump gas putting that kawi near the bottom of the list with the 06 r1 above you with just slip ons

[jason 41]

Thats one bad ass R-1..... I bet I could do some damage on that thing. Mabe I will. :evillaugh:

[GTS]

I think I'm gonna do some mods. Akra pipe , Commander etc.

[Nash]

What kind of gains are they getting out full systems and Power Commanders on the GSXR1000s?

[Nash]

Scott, when was the last you made something except for meeting at the tree once every three months?

Some times family has to come first, but I don't expect you to know anything about that.

Yeah, I know a little bit about it, but I just put on these things called......PANTS!

[iamnsxtc]

Scott, when was the last you made something except for meeting at the tree once every three months?

Some times family has to come first, but I don't expect you to know anything about that.

Yeah, I know a little bit about it, but I just put on these things called......PANTS!

LOL

great pics also. Caught one of my bike on the dyno!!

[mccutch2u]

the gsxrs are getting low to mid 170 on pump gas ....... but steve can say for sure

[burns]

Chris is right.
You would be amazed what power you can get from just a pc, air filter, custom map, some head work, and cams. Crazy horse power!!

[Scotty2]

Scott, when was the last you made something except for meeting at the tree once every three months?

Some times family has to come first, but I don't expect you to know anything about that.

Yeah, I know a little bit about it, but I just put on these things called......PANTS!

Those pants are a little hard to put on when your wife weighs 300 lbs...

[jason 41]

I think its time to jump back into this stuff again. THE KANG IS BACK. meet me at the tree. :evillaugh: So you can lose!!

I also wanted to thank Randy for spending his time energy and effort for organizing this whole event again. Keep doing what you do Randy, the Charleston sport biking scene is now livelier than it's ever been. Job well done!
thanks man helps to hear that every now and again.

[SUM650]

I think its time to jump back into this stuff again. THE KANG IS BACK. meet me at the tree. So you can lose!!

It would be real nice if the Kang could join us on the Deals Gap trip July 28th - 30th. It's not going to be a cmpetitive trackday type event, but a chance to do some good brisk pace scenic riding on some beautiful roads. Plus were talking about staying in Gatlinburg, which means if you want some of the Nascar King of go Karts then I'm your man. Don't worry about keeping up on deals gap, I'll get Nikki to wait up for you! :lol: I couldn't resist throwing that one out at you. Besides, the only way I can keep up with you now would be to tie a rope to the back of your bike.

[jason 41]

The next like 8 weekends in a row "after the 4th" I will be at jennings. I gotta get sharp before I go to barber. I got alot riding on that race. I do want to go to the gap......... Someday :shrug:

[ccs273]

sorry I missed it! I kind of got stuck up in Rock Hill for a while